Gl650 carport find rebuild - Page 3
Close
    
    
Page 3 of 6 FirstFirst 1 2 3 4 5 ... LastLast
Results 21 to 30 of 56
Like Tree27Likes

Thread: Gl650 carport find rebuild

  1. #21
    Senior Member
    Join Date
    Apr 2011
    Location
    Lexington NC
    Posts
    19,702
    check your pulse generators for output

    yellow to yellow 530 ohms plus or minus 60

    blue to blue 530 ohms plus or minus 60

    no continuity to ground on any of the 4

    test or swap the coils

    check or swap the plugs and the plug caps
    purplecx500 likes this.
    GET AN OIL FILTER ADAPTER

    Order The Quick Build Exhaust Pipes


    GET A QUICKSET VALVE TOOL


    Way to many bikes to maintain this list LOL !!

    email me at murray at murrayscarbs.com

  2. #22
    Senior Member nolimitz's Avatar
    Join Date
    Jan 2014
    Location
    Boise Id
    Posts
    3,388
    Ya all on the to do list. Got to late last nite, working today, but have Tues. off and the wife will be at work. Other than mowing the field of a front yard and maybe a hair cut it is bike wrenching day!

    Quote Originally Posted by murrayf View Post
    check your pulse generators for output

    yellow to yellow 530 ohms plus or minus 60

    blue to blue 530 ohms plus or minus 60

    no continuity to ground on any of the 4

    test or swap the coils

    check or swap the plugs and the plug caps
    rscottp and CXPHREAK like this.
    1982 GL500i Daily rider
    1982 GL500 Father/Son winter project. The green hornet! Alive and well!

    Mike Nixon's carb book
    Larry Cargill's carb book
    Factory service Manual

  3. #23
    Senior Member
    Join Date
    Apr 2011
    Location
    Lexington NC
    Posts
    19,702
    my tuesday will suck

    i have to have a huge tree cut down in my front yard

    that part is over 1k

    but to haul it all away wood have been over 3k

    so i get to cut it up and dispose of it
    Last edited by murrayf; 05-01-2017 at 06:25 AM.
    GET AN OIL FILTER ADAPTER

    Order The Quick Build Exhaust Pipes


    GET A QUICKSET VALVE TOOL


    Way to many bikes to maintain this list LOL !!

    email me at murray at murrayscarbs.com

  4. Remove Advertisements
    CX500Forum.com
    Advertisements
     

  5. #24
    Senior Member nolimitz's Avatar
    Join Date
    Jan 2014
    Location
    Boise Id
    Posts
    3,388
    Cut and sell as fire wood.
    1982 GL500i Daily rider
    1982 GL500 Father/Son winter project. The green hornet! Alive and well!

    Mike Nixon's carb book
    Larry Cargill's carb book
    Factory service Manual

  6. #25
    Senior Member
    Join Date
    Apr 2011
    Location
    Lexington NC
    Posts
    19,702
    my wife wnts her front yard looking pretty

    and i would never do anything that made people stop at my house lol

    my doormats all say go away
    GET AN OIL FILTER ADAPTER

    Order The Quick Build Exhaust Pipes


    GET A QUICKSET VALVE TOOL


    Way to many bikes to maintain this list LOL !!

    email me at murray at murrayscarbs.com

  7. #26
    Senior Member MobileAZN's Avatar
    Join Date
    Mar 2015
    Location
    Boise, Idaho
    Posts
    266
    LOL. More like a craigslist ad, free firewood, u cut, u haul.
    OCR likes this.
    1980 Honda CX500 Custom (In a pile of parts, current project)
    1981 Suzuki GN400CR (Cafe Racer, current ride)
    1976 Honda CB125S1 (Full original restoration. Sold her and miss it. Every. Single. Day.)

  8. #27
    Senior Member nolimitz's Avatar
    Join Date
    Jan 2014
    Location
    Boise Id
    Posts
    3,388
    Too freaking funny!

    Thought I start by checking for spark on left side as it's easy 2min job. Pulled the plug (which I hadn't really looked at before) and there is zero gap at the electrodes. Well Duh! set correct gap. Nice blue spark. re-installed and hey fired right up on both sides. Sweet. Have a minor exhaust pop as I release the throttle, so some carb fine tuning is probably in order. Is the pop a rich condition? Screws are out 2 1/2 turns as spec'ed in Larry's book.
    1982 GL500i Daily rider
    1982 GL500 Father/Son winter project. The green hornet! Alive and well!

    Mike Nixon's carb book
    Larry Cargill's carb book
    Factory service Manual

  9. #28
    OCR
    OCR is offline
    Senior Member OCR's Avatar
    Join Date
    Sep 2010
    Location
    Groton NY
    Posts
    2,534
    Popping on throttle release is a lean condition.
    It can be fixed by shimming the slide needle up slightly.
    (Usually about .5mm is enough)
    Past Master, Dryden Lodge #472
    Caroline Lodge # 681
    RAM Fidelity # 77





    '79CX500C

    http://cx500forum.com/mediawiki/inde...itle=Main_Page



    we are all given sh*t in life, but some of us learn to turn it into fertilizer and grow from it, and some us try to fling it on others like monkeys.

  10. #29
    Senior Member
    Join Date
    Apr 2011
    Location
    Lexington NC
    Posts
    19,702
    a bad or stuck acv will cause that as will and missing acv oring

    a air leak in the exhaust can cause it

    i have never seen it fixed by shimming teh needle on these carbs as at idle the needle is not in play the idle circuit is
    GET AN OIL FILTER ADAPTER

    Order The Quick Build Exhaust Pipes


    GET A QUICKSET VALVE TOOL


    Way to many bikes to maintain this list LOL !!

    email me at murray at murrayscarbs.com

  11. #30
    Senior Member nolimitz's Avatar
    Join Date
    Jan 2014
    Location
    Boise Id
    Posts
    3,388
    new ACV's and orings in place. Have not yet checked any exhaust components.
    Got the front calipers rebuilt and installed today, waiting on new lines One is totally plugged! Any special cleaning methods for the T fitting?
    1982 GL500i Daily rider
    1982 GL500 Father/Son winter project. The green hornet! Alive and well!

    Mike Nixon's carb book
    Larry Cargill's carb book
    Factory service Manual

Page 3 of 6 FirstFirst 1 2 3 4 5 ... LastLast

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Saga of the GL650I carport find
    By nolimitz in forum General Discussion
    Replies: 18
    Last Post: 04-18-2017, 06:59 PM
  2. GL650 Oil Pan Gasket, where to find one?
    By 83gl650 in forum General Discussion
    Replies: 7
    Last Post: 09-16-2015, 08:54 AM
  3. GL650 Rebuild?
    By BC4Lyphe in forum Technical Help Forum
    Replies: 8
    Last Post: 01-08-2015, 08:40 AM
  4. GL650 garage-find for sale, in UK.
    By Capt_Biggles in forum Selling and Buying Forum
    Replies: 4
    Last Post: 04-14-2013, 04:59 PM
  5. Where to find full gasket rebuild kit?
    By wecoyote in forum Technical Help Forum
    Replies: 4
    Last Post: 09-27-2011, 06:05 AM