gl500 accelerator pump o ring size?...the one between the bowl and the body...
Close
    
    
Results 1 to 8 of 8
  1. #1
    Junior Member
    Join Date
    May 2013
    Location
    Kansas City, MO
    Posts
    16

    gl500 accelerator pump o ring size?...the one between the bowl and the body...

    I'm trying to track down the dimensions of the o ring located between the carb bowl and body that seals the accelerator pump passage. I really appreciate your help!
    Past Bikes: 250 Nighthawk, XS1100, VT500, 250 Ninja,
    Current Bike: 1981 GL500i

  2. #2
    Senior Member JAMMAN's Avatar
    Join Date
    May 2014
    Location
    Columbus Ohio
    Posts
    205
    If someone don't chime in I have a disassembled carb set at work and I'm going in tomorrow morning. I can measure it and probably give you the "dash" number. I get viton orings from Mcmaster Carr.
    82 GL500 work in progress LOL
    GONE BUT NOT FORGOTTEN

  3. #3
    Senior Member JAMMAN's Avatar
    Join Date
    May 2014
    Location
    Columbus Ohio
    Posts
    205
    It's 1MM thick with a 4.5MM I.D

    McMaster Carr # 9262K611

    I'm sure it must be a common size and just about any motorcycle repair place would have a vat of them laying around.
    82 GL500 work in progress LOL
    GONE BUT NOT FORGOTTEN

  4. Remove Advertisements
    CX500Forum.com
    Advertisements
     

  5. #4
    Senior Member Ed Z's Avatar
    Join Date
    Apr 2014
    Location
    Maryland
    Posts
    240
    Randal Washington (Randakk.com) could tell ya exactly what size and possibly even sell ya one or two of em... Couldn't hurt to check with him...


    Randakk's Cycle Shakk
    GL650 Interstate

  6. #5
    Senior Member
    Join Date
    Apr 2011
    Location
    Lexington NC
    Posts
    20,021
    it is a 5x1.2

    look down this page and you will see them all

    http://australiancx.asn.au/gallery/a...ally-carby.pdf

    HeY ANYONE KNOW HOW TO SAVE THIS HERE SO IT CAN BE SEARCHED on this forum ?????
    GET AN OIL FILTER ADAPTER

    Order The Quick Build Exhaust Pipes


    GET A QUICKSET VALVE TOOL


    Way to many bikes to maintain this list LOL !!

    email me at murray at murrayscarbs.com

  7. #6
    Senior Member JAMMAN's Avatar
    Join Date
    May 2014
    Location
    Columbus Ohio
    Posts
    205
    OK they had the wrong one in mine then because I measured it and it was exactly what I posted. Or perhaps it shrunk being smaller in both directions.

    An administrator could mark the topic as "sticky" and it would stay on top. A search should bring it up anyway if the database is healthy.
    82 GL500 work in progress LOL
    GONE BUT NOT FORGOTTEN

  8. #7
    Junior Member Randakk's Avatar
    Join Date
    Aug 2010
    Location
    Pinehurst, NC USA
    Posts
    15
    The correct size for that oring is actually 5.0 x 1.3 mm.
    Randall Washington (Randakk)

    Founder & Chief Executive Rider

    Randakk's Cycle Shakk, LLC

    Pinehurst, NC USA



    www.randakks.com/

  9. #8
    Super Moderator ramprat06's Avatar
    Join Date
    Aug 2010
    Location
    Vancouver, WA USA
    Posts
    10,353
    I've stuck the thread, but keep in mind that many don't use the main pages. I don't have time to add it to the WIKI right now, but this would be helpful, perhaps JC or the other WIKI editors can add it.
    Thanks.

    Joel in the Couve
    G-Loria's Story including Part III > I miss her dearly, but she is in good hands. Part III included at the end of the link.

    Forum Settings that everyone should make

    Photo and Video posting Tips

    The WIKI link for all the good tech stuff. including free FSM's
    with addendums

    Larry's most excellent CX/GL Carb book link

    TAPATALK USERS--
    Please go into the Tapatalk app's settings and turn off the "auto signature" feature. Thank You.


Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. anyone have a good oil pump body?
    By ronj10 in forum Technical Help Forum
    Replies: 0
    Last Post: 04-30-2014, 10:09 AM
  2. Is this Bowl O Ring Too Skinny?
    By RVP3 in forum General Discussion
    Replies: 3
    Last Post: 10-04-2012, 10:37 AM
  3. WTB Accelerator (left) Carb bowl.
    By pvtdonut2382 in forum Selling and Buying Forum
    Replies: 2
    Last Post: 10-03-2012, 03:31 PM
  4. Accelerator Pump 500/650
    By fibonacci in forum Technical Help Forum
    Replies: 4
    Last Post: 10-25-2011, 05:03 AM
  5. Accelerator Pump
    By marnargulus in forum Technical Help Forum
    Replies: 7
    Last Post: 05-03-2011, 02:12 PM

Search tags for this page

accel pump o ring cx500 carb

Click on a term to search for related topics.